BD 640 CONNECT
-
Used for function and performance tests on the brake system
-
BNet Superautomatik and CAS[plus] functions.
-
Automatic inter change analyses of ABS sensors
Technical Data
|
|
| Drive power | 2 x 3,7 kW |
| Maximum drive-over weight | 4 t |
| Maximum test weight / axle | 2,5 t |
| Test speed | 5,2 km/h |
| Measuring range | 0-8 kN |
| Nominal measuring range | 6,0 kN |
| Minimum track width | 800 mm |
| Maximum track width | 2200 mm |
| Roller diameter | 205 mm |
| Roller width | 700 mm |
| Height difference of rear roller | 25 mm |
| Dimensions (W/L/D) | 2360 / 660 / 250 mm |
Configuration |
||
| Standard | Optional | |
| KTS 540 | ||
| ESI[tronic] Licence | ||
| Full hot-dip galvanization | ||
| Plastic corundum coating | ||
| IR Remote Control | ||
| Electromagnetic brake | ||
| Reverse operation | ||
| Automatic All-Wheel Detection | ||
| Cover plates | ||
| Spike rollers | ||
| Edge protection | ||
| Assembling case | ||
MB 8100 / 8200 / 8815 • BD 740
-
Eleven balancing programs with automatic measuring procedure
-
Electronic data recording
-
OEM Approvals
Technical data |
|||
| MB 8100 / 8200 | MB 8815 | BD 740 | |
| Maximum overdrive weight | 18 T | 15 T | 7,5 T |
| Maximum test weight / axle | 16 T | 13 T | 5 T |
| Test speed | 2.4 / 4.8 km/h | 2.2 km/h | 2.3 km/h |
| Test speed optional | — / — | 2.2 / 4.4 km/h | — |
| Moto power | 2 x 12.5 kW | 2 x 6.5 kW | 2 x 3.7 kW |
| Time-lag fuse | 3 x 50 A | 3 x 25 A | 3 x 25 A |
| Roller friction coefficient dry / wet | 0.8- 0.6 | 0.8- 0.6 | 0.8- 0.6 |
| Minimal track | 800 mm | 800 mm | 860 mm |
| Maximal track | 3.000 mm | 3.000 mm | 2.800 mm |
| Roller diameter | 280 mm | 205 mm | 205 mm |
| Roller length | 1.000 mm | 1.000 mm | 970 mm |
| Optional roller length | 1.100 mm | — | — |
| Roller increase | 50 mm | 35 m | 25 mm |
| Roller set type | divided | divided | single piece |
| Display range truck | 0-40 kN | 0-40 kN | 0-12,5 kN |
| Display range car | 0-8 kN | 0-8 kN | 0-6 kN |
| Measurement roller set | MB 8100 / 8200 | MB 8815 | BD 740 |
| Width | 1.150 / 860 mm | 1.340 mm | 2.940 mm |
| Length | 1.300 / 1.400 mm | 730 mm | 690 mm |
| Depth | 660 mm | 590 mm | 280 mm |
TL600 Serie
-
Worldwide Homologation
-
Super Automatic Mode
-
BNET Technology
Technical Data |
|
Dimensions |
|
| Shortest possible length of the test lane: 2030 mm !! | |
| Dimensions BD600 W x L x D (mm) 2360 x 660 x 250 | |
| Dimensions SA640 W x L x D (mm) 2360 x 440 x 280 | |
| Dimensions SN680 W x L x D (mm) 2360 x 440 x 280 | |
| Dimensions ST600 W x L x D (mm) 480 x 750 x 46 | |
Test widths |
|
| Largest test width 2200 mm | |
| Smallest test width BD600 800 mm | |
| Smallest test width SA640 820 mm | |
| Smallest test width SN680 820 mm | |
Wheel diameter |
|
| Smallest testable wheel diameter ~ 320 mm (10’’) | |
| Largest testable wheel diameter ~ 800 mm (20’’) | |
Axle loads |
|
| Permissible test axle load BD600 3500 kg | |
| Permissible test axle load SA640 1500 kg | |
| Permissible test axle load SN 680 1500 kg | |
| Permissible test axle load ST600 1500 kg | |
| Permissible max. drive-over load BD 600 4000 kg | |
| Permissible max. drive-over load SA640 2000 kg | |
| Permissible max. drive-over load SN680 2000 kg | |
| Permissible max. drive-over load ST600 2000 kg | |
Braking force |
|
| Maximum braking force per wheel 7.5 kN | |
BD 700
-
Optimized for transporters and light trucks
-
Track width of up to 2.8m
-
BNET- Technology
Technical Data |
|
Range of application |
|
| Test load / axle: 5t | |
| Overdrive load: 7.5t | |
| Measuring range brake force: 0-6 kN and 0-12 kN | |
| Measuring range track: 12 mm/m | |
| Track width: 860 – 2,800 mm | |
Motor |
|
| Motor power: 2 x 3.7 kW | |
| Test speed: 2.3 km/h | |
| Supply: 400 V 3P, 50 Hz | |
| Fuse: 3 x 25 A | |
Mechanics |
| Roller diameter: 205 mm |
| Roller length: 970 mm |
| Roller elevation: 25 mm |
| Roller friction dry/wet: 0.8 / 0.6 |
| Dimensions:Length: 690 mm |
| Depth: 280 mmWidth: 2,940 mm |
BD 600
-
Global OEM Approvals
-
Analogue display / PC visualisation
-
Extendable to a test lane by BNET Technology
Basic Data: |
| Dimensions W x L x D (mm) 2360 x 660 x 250 |
| Weight approx. 420 kg |
| Friction value dry 0.8 |
| Friction value wet 0.7 |
| Roller length 700 mm |
| Roller diameter 205 mm |
| Largest test width 2200 mm |
| Smallest test width 800 mm |
| Elevation of rear rollers to front rollers 25 mm |
| Height difference roller upper edge front to shop floor – 10 mm |
| Smallest testable wheel diameter ~ 320 mm (10’’) |
| Largest testable wheel diameter ~ 800 mm (20’’) |
| Permissible test axle load 2500 kg |
| Permissible max. drive-over load 4000 kg |
| Maximum braking force per wheel 5 kN |
| Noise emission LwA <75 dB (A |
Roller Surface: |
| Expanded metal DIN 791 (rib mesh) mesh length 62 mm |
| Mesh width 21 mm |
| Bar thickness 2 mm |
| Bar width 2.5 mm |
| Rib mesh thickness 2 mm |
| Plastic corundum coating of interstices with plastic |
| Plastic coating approx. 1 mm over rib mesh |
| Grain size 2.0 to 3.2 mm |
| Roller colour black |
Performance Data: |
| Voltage supply 3 x 400VAC / 9.8A / 50-60 Hz |
| Fuse supplied 3 x 20Z / C 3-pin (400V) |
| Feed line supplied 5 x 2.5 mm? (400V) |
| Test speed 2.4km/h |
| Nominal output of the drive motors 2 x 2.0 kW |
Optional 230V: |
| Voltage supply 3 x 230VAC / 17A / 50-60 Hz |
| Fuse supplied 3 x 25A / C 3-pin |
| Feed line supplied 4 x 2.5 mm? |
Environmental Conditions: |
| Protection class (according to DIN 40 050) IP 54 |
| Permissible humidity (relative without condensation) up to 85% |
| Ambient temperature -10 to +60 °C |
| Storage -10 to +60 °C |
BD 500
-
High quality standard
– tough construction
-
Up to 5 tons gross vehicle weight
-
BNET-Technology
Basic Data: |
| Dimensions W x L x D (mm) 2360 x 660 x 250 |
| Weight approx. 420 kg |
| Friction value dry 0.8 |
| Friction value wet 0.7 |
| Roller length 700 mm |
| Roller diameter 205 mm |
| Largest test width 2200 mm |
| Smallest test width 800 mm |
| Elevation of rear rollers to front rollers 25 mm |
| Height difference roller upper edge front to shop floor – 10 mm |
| Smallest testable wheel diameter ~ 320 mm (10’’) |
| Largest testable wheel diameter ~ 800 mm (20’’) |
| Permissible test axle load 3500 kg |
| Permissible max. drive-over load 4000 kg |
| Maximum braking force per wheel 7.5 kN |
| Noise emission LwA <75 dB (A) |
Roller Surface: |
| Expanded metal DIN 791 (rib mesh) mesh length 62 mm |
| Mesh width 21 mm |
| Bar thickness 2 mm |
| Bar width 2.5 mm |
| Rib mesh thickness 2 mm |
| Plastic corundum coating of interstices with plastic |
| Plastic coating approx. 1 mm over rib mesh |
| Grain size 2.0 to 3.2 mm |
| Roller colour black |
Performance Data: |
| Voltage supply 3 x 400VAC / 9.8A / 50-60 Hz |
| Fuse supplied 3 x 20Z / C 3-pin (400V) |
| Feed line supplied 5 x 2.5 mm?(400V) |
| Test speed 2.6km/h |
| Nominal output of the drive motors 2 x 3.7 kW |
Optional 230V: |
| Voltage supply 3 x 230VAC / 17A / 50-60 Hz |
| Fuse supplied 3 x 25A / C 3-pin |
| Feed line supplied 4 x 2.5 mm? |
Environmental Conditions: |
| Protection class (according to DIN 40 050) IP 54 |
| Permissible humidity (relative without condensation) up to 85% |
| Ambient temperature -10 to +60 °C |
| Storage -10 to +60 °C |